Oase Complete Filter Kit 1300 Instrucciones De Uso página 4

- English -
Installation
Important:
● The unit can be used with the following:
○ With the stepped hose adapter for feeding a small waterfall or water feature.
○ With the nozzle set to create various fountain displays.
○ With the diverter valve, allowing an additional water feature to be operated simultaneously
with the fountain nozzle.
● It is recommened to place the unit horizontally on the ground ensuring its stable position.
●
Do not lift the unit by its power cord.
● The unit's filter foam, biomedia, pebbles and pump are preinstalled in the filter housing.
For installation using the stepped hose adapter
● For maximum water flow, it is recommended that the
largest tubing size for your pump is used.
1. Attach the stepped hose adapter with O ring 12x4 to the
filter kit first, then connect tubing to the adapter.
NOTE: Tubing is NOT INCLUDED.
+
● Connect the tubing to desired water feature or spitter.
-
+
2. Place the unit in the pond as horizontal as possible on
firm, sludge-free ground and ensure that it is completely
covered with water at a maximum of 6.6 feet below the
surface of the water.
-
Tubing
1.
Adapter
2.
6.6 ft.
maximum
Filter kit
4