Twilight Tenmars TN-TM197 Manual De Usuario página 24

5.1 Zeroing
Move the probe away from the magnetic field and
press
zeroing completed, the ZERO disappears.
5.2 Peak Measurement
Move the probe away from the magnetic field, then
press and hold
Measurement. The upper digit row presents the
instant measuring; the lower digit row presents the
peak value x.x
Again, press and hold
, ZERO will appear on the LCD. After
If more than 3G or 0.3mT,
appear to prevent from erroneous
zeroing the value in measuring. (from
PC)
If more than 3G or 0.3mT,
appear to prevent from erroneous
zeroing the value in measuring. (from
HOST)
The zeroing function is unavailable for
temperature.
for ≥2 seconds to start Peak
Zeroing will run automatically in prior to
Peak Measurement. If more than 3G or
0.3mT,
from erroneous zeroing the value in
measuring.
to quit this function.
will appear to prevent
5
TM-197
will
will