Twilight Tenmars TN-TM197 Manual De Usuario página 31

7 General Specifications:
Liquid crystal display (LCD) of 5 digits with the

displaying value up to 30000.
Backlight display. The backlight is manually

turned on (it will turn off automatically after turned
on for 30 seconds) and turned off. If connected
via an external power supply, the backlight will lit
and stay on; it will turn off until the external power
supply disconnected.
Enable and disable auto power off function

(default 15 minutes).
Measurement range: 0~3000mT (milli Tesla)

/0~30000G (Gauss); Auto Range function (with
Automatic Measurement).
Conversion of units: 1mT (milli Tesla) = 10G

(Gauss)
Relative value/Peak hold/Real time Zeroing

function.
Enable and disable auto power off function

(default power off is 15 minutes from the last
operation).
DATA HOLD(Data hold)

MAX/MIN (Maximum hold/ Minimum hold)

The GO and NO-GO alarm function and its

settings that can be applied to detect good and
defective products on the production line.
Unit switch for Gauss/Tesla.

The maximum, minimum, and average values:

auto export the top 10 max./top 10 min./ average
values based on the data which is recorded and
downloaded to the computer.
As connected to a PC, press REC to record the

real-time data in the PC.
Overload display: "OL".

Manual recording: up to 200 logs.

12
TM-197