Publicidad
Idiomas disponibles
Idiomas disponibles
5.12Manual range mode/Automatic range
mode
Press
with the LCD showing
different range modes.
Press and hold
automatic range mode with LCD showing
5.13AC/DC Switching magnetic field
Press
magnetic field and DC magnetic field.
5.14Setup：Step 1
Press
1 to step 8, while
Step 1. Setup unit G or mT.
1. Press
2. Again, press
Step 2. Setup unit ℃ or ℉
1. Press
2. Again, press
Step 3. Set up the upper limit (Max.) for alarm
GO/NO-GO
1. The default value is 20000G (2000.0mT). Press
or
value.
2. Again, press
to operate in the manual range mode
for ≥ 2 seconds to return to
to switch the measurement between AC
Step 8
~
to enter the setup procedure from step
or
to select the unit G or mT.
to go to Step 2.
or
to select the unit ºC or ºF.
to go to Step 3.
to modify and setup the default
to go to Step 4.
. This can change into two
flashes on the LCD.
8
TM-197
.
Publicidad
