Publicidad
Turbo: Push this button on COOL mode, the air conditioner goes into powerful cooling operation. Push
l
again to cancel the TURBO function.
LOCK Button: When you press the recessed LOCK button, all current settings are locked in and the remote
m
controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK mode.
LED: Press this button to clear the digit display in the air conditioner. The digit display in the air condition-
n
er will reactivate itself automatically after 3 seconds, when no buttons are being pressed in this period.
Press it again to activate it (Not applicable to units without this function).
SHORTCUT (MEMORY SHORTCUT): Button: Used to restore the current settings or resume previous set-
o
tings. On the first time connecting to the power, if push the SHORTCUT button, the unit will operate on
AUTO mode, 24ºC, and fan speed is Auto. Push this button when remote controller is on, the system will
automatically revert back to the previous settings including operating mode, setting temperature, fan
speed level and sleep feature(if activated). And transmit the signals to the unit. If pushing more than 2
seconds, the system will automatically restore the current operation settings including operating mode,
setting temperature, fan speed level and sleep feature (if activated).
Names and Functions of indicators on Remote Controller
auto cool dry heat
SET TEMP. TIMER ONOFF
sleep
lock
run
Transmission indicator: This transmission indicator lights when remote controller transmits signals to
the indoor unit.
Mode display: Displays the current opeartion mode. Including Auto
applicable to cooling only models), Fan
Temp. / Timer display: Displays the temperature setting (17º C ~ 30ºC). When you set the operating
mode to FAN, no temperature setting is displayed. And if in the TIMER mode, shows the ON and OFF
settings of the TIMER.
Fan speed display: Displays the selected fan speed, AUTO (no display), LOW
fan speed is AUTO when the operating mode is either AUTO or DRY.
ON / OFF display: Displayed by pressing the ON / OFF button. Press the ON / OFF button again to remove.
Lock display: Displayed when LOCK mode is activated.
Sleep display: Displayed under sleeping operation. Press the SLEEP button again to remove.
G
NOTE!
All items are shown in the Fig. 2 for the purpose of clear presentation. But during the actual
operation only the relative functional items are shown on the display panel.
4
92
fan
2
1
3
4
7
6
5
.
, Cool
, Dry
, Heat
, MED and HIGH . The
(Not
Publicidad
