Philips HQ7142 Manual página 11

Guarantee restrictions
The shaving heads (cutters and guards) are not
covered by the terms of the international guarantee
because they are subject to wear.
Troubleshooting
1 Reduced shaving performance.
Cause 1: the shaving heads are dirty.The shaver has
not been rinsed long enough or the water used was
not hot enough.
Clean the shaver thoroughly before you continue
,
shaving. See chapter 'Cleaning and maintenance'.
Cause 2: long hairs are obstructing the shaving heads.
Clean the cutters and guards with the brush
,
supplied. See chapter 'Cleaning and maintenance',
section 'Every six months: shaving heads'.
Cause 3: the shaving heads are damaged or worn.
Replace the shaving heads. See chapter
,
'Replacement'.
2 The shaver does not work when the on/off
button is pressed.
Cause 1: the battery is empty.
Recharge the battery. See chapter 'Charging'.
,
Cause 2: the appliance is not connected to the
mains.
Put the powerplug in the wall socket.
,
3 The shaving unit has come off the shaver.
The shaving unit has not been placed correctly.
If the shaving unit becomes detached from the
,
shaver, you can easily put it back by inserting
the hinge into the slot in the rim of the hair
chamber and pushing it home until it locks into
place ('click').
EnglisH
13