Descargar Imprimir esta página

BURG-WACHTER Pure-Safe E FP Instrucciones De Uso página 7

Ocultar thumbs Ver también para Pure-Safe E FP:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Error messages (display screen)
FP-ERROR
Fingerprint not recognised (e.g. finger too dry,
too wet, injured, wrong finger)
CODE-ERROR
Incorrect code entry
BLOCK
The bolts hit an obstacle and cannot
extend to the end
The electronics were operated without remo-
ving the emergency key.
> Remove the obstacle and/or the emergency
key and restart the process.
If the error message is repeated, replace the
batteries and restart the process with the
door open. Contact the technical service if
the error message reappears.
LOW BATT
Batteries are low and should be replaced
ERROR
Restart the process.
If the error message is repeated, replace the
batteries and restart the process with the
door open. Contact the technical service if
the error message reappears.
FP-Full
Maximum number of fingerprints already
stored (5 fingerprints).
Changing the batteries
A warning message „LOW BATT" is shown on the electronic lock display when
the batteries are nearly exhausted and need replacing. Please change as soon
as possible.
If the batteries are already exhausted and the door was opened with the emer-
gency key, make sure that you have properly removed the emergency key after
opening the door before replacing the batteries..
Open/unlock the safe.
The battery compartment is located on the inside
of the door.
Remove the screw on the battery compartment
cover with a Phillips screwdriver.
Remove and discard the batteries according to the
disposal instructions (see right).
Replace the 4 x AA Mignon LR 6 Alkaline with new
ones. Be sure to insert the batteries in the correct
direction as per the drawings. Please use high
quality batteries and not rechargeable ones.
Replace the battery compartment cover and
tighten the cover screw.
Pure-Safe Electronic E FP
Warranty
BURG-WÄCHTER products comply with the technical standards in force at the
time of production and adhere to our own quality standards. The guarantee
only covers defects which can be proved to have resulted from production or
material defects at the time of purchase. The warranty ends after two years from
the date of purchase, further claims are excluded. Defects and damage caused
by e.g. transport, incorrect operation, improper use, wear etc. are excluded
from the warranty. The batteries are not included in the guarantee. A short
description of any defects identified must be made in writing and the device
returned to the place it was purchased, together with the purchase receipt.
After the device has been tested, and within a appropriate period of time, the
guarantor will decide whether or not to repair or exchange the item.
Note:
In order to deliver a flawless and high quality product to you and to better
assist you in case of service or repair, it is necessary that faulty or defective
devices along with the valid administrator code be presented to your dealer
together with the purchase receipt.
For returns, all undamaged device parts must furthermore be in the factory
setting due to your right of revocation. Failure to comply with this will invalidate
the warranty.
Disposal of the device
Please help us avoid unnecessary waste. Should you intend to dispose of
this device at any time, please remember that many components of this
device contain valuable materials that can be recycled.
Please be aware that electrical and electronic equipment and
batteries marked in this way must not be disposed of with
household waste but collected separately. Please obtain
information on the collecting points for electrical waste from the
responsible authority of your city/municipality.
BURG-WÄCHTER KG hereby declares that the present Device
complies with the directives 2014/30/EU, (EMC) and 2011/65/EU
(RoHS) compliant.
The full text of the EU declaration of conformity is available at the
Internet address
https://burg.biz/pages/eu-konformitaetserklaerung.
Safety recommendation
Please clean the keyboard operating surface periodically with a microfibre
cloth (e.g. glasses cleaning cloth for spectacles) to remove any fingerprints
on the keyboard surface.
Printing and typesetting errors as well as technical changes reserved.
Notes
English I 7

Publicidad

loading

Este manual también es adecuado para:

Pure-safe e