D-Link DGS-1005A Guia De Instalacion página 3

PRODUCT SETUP
SWITCH SET-UP
Step 1
Connecting the power adapter
Plug the power adapter into a free wall socket, then plug the other
end of the power adapter cable into the power port of the switch.
Internet Router
The power LED will light up, confirming that the device is powered
up successfully.
Power
Step 2
Connecting your Network Devices
Use a LAN cable to connect your network device to one of the 5
ports or 8 ports on the switch.
Step 3
Power LED
Determine that the Switch is Powered On
The Power LED indicator light is green when the Switch is receiving
power; otherwise, it is off.
Determine that the Network Devices are Connected
The Link/Act LED indicator light is green when the port is connected to a
device.
The green indicator blinks as data is transmitted or received.
Status LED
3