Publicidad
Idiomas disponibles
Idiomas disponibles
To select a reverse mode (deck 2 only)
Each time REV MODE is pressed, the reverse mode changes.
2
To
play one side only, select
=.
To play from front side to reverse
side once only, select Z).
To play both sides repeatedly, select (Z).
*,W
When tapes are loaded in both decks, Z) on the display
indicates Continuous Play.
APUSH
EJECT
To select a playing deck
When tapes are loaded in both decks, press TAPE/DECK 1/2
Deck 2
first
to select a deck.
The selected deck number is displayed.
To stop play, press H.
On deck 1, tapes are always played back on both sides.
To pause play (deck 2 only), press 11. To resume play, press
On deck 2, you can select a reverse mode to play back one or
again.
both sides.
To change the playback side, press<
in play or pause mode.
" Use Type I (normal), Type II (high/CrOz) or Type IV (metal)
To fast forward or rewind,
press
+
or -.
Then
press
to
tapes
for playback.
stop the tape.
7 Press TAPE/DECK 1/2 and press A PUSH EJECT
to open the cassette holder.
=p
E
To start play when the
power is
off (Direct Play Function)
Press TAPHDECK 1/2. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press
CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened and closed.
Insert a tape with the exposed side
down.
Push
the cassette
holder
to close.
2 Press +>
to start play.
Selected deck number
The tape counter
F:
The front side is being played (forward).
<:
The back side is being played (reverse).
18
ENGLISH
Publicidad
