Publicidad
Idiomas disponibles
Idiomas disponibles
CHECK
TIRE PRESSURE
The tires on your tractor were over-inflated
at the factory for shipping purposes. Correct
tire pressure
is important for best cutting
performance.
Reducetire pressureto PSI shown on tires.
CHECK
DECK
LEVELNESS
For best cutting
results, mower housing
should be properly leveled. See "TO LEVEL
MOWER" in the Service and Adjustments
section of this manual.
CHECK
FOR PROPER
POSITION
OF
ALL
BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments section of this man-
ual. Verifythat the belts are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor,
checkto see that the brake is operating prop-
erly. See "TO CH ECK BRAKE" inthe Service
and Adjustments
section
of this manual.
t#fCHECKLIST
Before you operate your new
tractor, we
wish to assure that you receive the best
performance
and satisfaction
from this
Quality Product.
Please review the following checklist:
_" All assembly
instructions
have been
completed.
_" No remaining loose parts in carton.
J'Battery
is properly
prepared
and
charged.
J" Seat is adjusted comfortably and tight-
ened securely.
J" All tires are properly inflated.
(For ship-
ping purposes, the tires were overinftated
at the factory).
J" Be sure mower deck is properly leveled
side-to-side/front-to-rear
for best cutting
results. (Tires must be properly inflated
for leveling).
J" Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
J" Check wiring.
See that all connections
are still secure and wires are properly
clamped.
While learning how to use your tractor, pay ex-
tra attention to the following important items:
J" Engine oil is at proper level.
J" Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
J" Become familiar with all controls, their
location
and function.
Operate them
before you start the engine.
J" Be sure brake system is in safe operating
condition.
J" Be sure Operator Presence System and
Reverse Operation
System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).
12
Publicidad
