"In case of replacement with
halogen lamp use only
self-shielded tungsten halo-
gen lamps or self-shielded
metal halide lamps."
2. USE
• The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other
than for which it has been designed.
•
the hood when it is in operation.
•
onto the bottom of the pan only, making
sure that it does not engulf the sides.
• Deep fat fryers must be continuously
monitored during use: overheated oil
3. CARE AND CLEANING
-
washable and cannot be regenerated,
and must be replaced approximately
every 4 months of operation, or
more frequently for particularly heavy
usage (W).
W
-
every 2 months of operation, or more
frequently for particularly heavy usage,
and can be washed in a dishwasher
(Z).
• Clean the hood using a damp cloth and
a neutral liquid detergent.
4. CONTROLS
L Light
Switches the lighting system on
and off.
M Motor
Switches the extractor motor on
and off.
V Speed Sets the operating speed of the
extractor:
1. Low speed, used for a continu-
ous and silent air change in the
presence of light cooking vapour.
2. Medium speed, suitable for most
operating conditions given the
optimum treated air flow/noise
level ratio.
3. Maximum speed, used for elimi-
nating the highest cooking vapour
emission, including long periods.
9