Publicidad
Idiomas disponibles
Idiomas disponibles
Spin byke
MAKALU
ES
EN
3. PRODUCT ASSEMBLY
STEP 1
The front stabiliser (2) is fixed to the main body (1) with carriage bolts (16), flat washers (17) and lock nuts
(18), and secured with a spanner (25). Note: the front stabiliser movement wheels (2) are forward, as shown
in the picture.
Similarly, the rear stabiliser (3) is attached to the main body (1) with carriage bolts (16), flat washers (17)
and lock nuts (18), and secured with a spanner (25).
Attention: The movable wheels on both sides of the front stabiliser (2) can move the machine over a short
distance.
17
Publicidad
