Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
CONTROL PANEL & DESCRIPTION OF FUNCTION
1.
POWER KEY
Press to turn unit "ON" or "OFF".
2.
FUNCTION
Press this key to select cooling, heating, or dehumidifying.
3. TEMPERATURE REGULATION KEY (UP)
During cooling function：This key raises the preset temperature by 1℃ each time it is pressed
and the maximum limit is 30℃.
GB
68
During heating function：
4. TEMPERATURE REGULATION KEY (DOWN)
During cooling function：This key lowers the preset temperature by 1℃ each time it is
During heating function：This key lowers the preset temperature by 1℃ each time and
5.
L.E.D. DISPLAY
The display indicates the current setting temperature or the timer setting. When the set
temperature or the timer is adjusted, the new setting is shown then the display returns the
current set temperature.
The display is also used to show error codes should a fault occur, see ERROR
CODES.
6. SPEED
Press to select either LOW, MEDIUM, HIGH or AUTO fan speed.
If "AUTO" is selected,"HIGH" or "MEDIUM" or "LOW" will be
selected automatically according to the difference between setting temperature
and ambient temperature.
Note: In heating function and dehumidifying function, this key is invalid because the unit is
defined to be high speed in heating mode and low speed in dehumidifying mode.
7. PROGRAMMABLE TIMER
Programmable timer ON/OFF key.
TIMER‐ON: The timer‐on is used to turn on the unit automatically after the set time is over.
a)
b)
This key raises the preset temperature by 1℃
pressed and the maximum limit is 25℃.
pressed and the minimum limit is 17℃.
the minimum limit is 15℃.
Press the "TIMER" key at stand‐by status to set the time you desired.
Once the set hour has come to an end, the unit will turn on automatically.
i.
Press the "POWER" key before time out, the setting time will be canceled
and the unit will turn on.
69
each time it is
GB
Publicidad
