ENGLISH
3. ASSEMBLY
Note:
Always unplug the device from the mains before mounting or dismounting accessories.
1.
Connect the flexible hose to the air-inlet duct and push until you hear it click into place.
Fig. 2
2.
Insert the stainless-steel telescopic tube into the free end of the flexible hose.
3.
To extend the stainless-steel telescopic tube: press the button and pull the inner
telescopic tube outwards.
4.
To mount the suction base on the telescopic tube: insert the telescopic tube into the
suction base. Adjust the telescopic tube to the desired length.
4. OPERATION
Note:
-
Once the accessories are mounted, unwind the cable enough to plug it into the socket.
-
A yellow mark on the power cord marks the ideal length. Do not unwind the power beyond
the red mark.
1.
Insert the power plug into the power socket.
2.
Press the On/Off button to turn the vacuum cleaner on.
3.
To rewind the power cord, press the cable-rewinding button with one hand and hold the
power cord with the other to avoid damage or injury resulting from a whipping effect.
4.
To adjust the suction level, turn the knob and select the desired suction power.
Important:
The vacuum cleaner's motor is equipped with a safety thermostat. If for any reason the vacuum
cleaner overheats, the thermostat will automatically switch off the appliance. If this happens,
switch off the vacuum cleaner and unplug it from the socket. Remove and empty the dust tank
and clean the filter. Allow the appliance to cool down for about an hour. To restart it, plug it
back into the socket and switch it on.
Attachments
Use the most appropriate accessory depending on the kind of cleaning:
-
Accessory for furniture: perfect for vacuuming on wardrobes, chairs, tables, etc. without
damaging them.
-
Accessory for corners: use it to vacuum the dirt on corners and sockets, etc.
-
Best Friend Care air brush accessory for pets and upholstery: perfect for vacuuming pet
hair and for all types of fabrics and upholstery (sofas, armchairs, etc.).
36