Descargar Imprimir esta página

ResMed AirSense10 Guia Del Usuario página 23

Publicidad

Idiomas disponibles

Idiomas disponibles

Aircraft use
ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21,
category M) for all phases of air travel.
Wireless module
Technology used:
FCC ID: 2ACHL-AIR10CD
The AirSense 10 device complies with FCC Rules.
The AirSense 10 device should be used at a minimum distance of 0.8" (2 cm) from the body during operation. Additional
information regarding the FCC Rules for this device can be found on www.resmed.com.
Operating pressure range
AutoSet, AutoSet For Her, Elite, CPAP
Supplemental oxygen
Maximum flow:
Pneumatic flow path
Design life
Device, power supply unit:
Cleanable water tub:
Standard water tub, air tubing:
General
The patient is an intended operator.
Humidifier performance
The following settings have been tested at 71.6°F (22°C) ambient temperature:
Mask Pressure
RH output %
cm H
O
Setting 4
2
4
85
10
85
20
85
1
AH - Absolute Humidity in mg/L
2
BTPS - Body Temperature Pressure Saturated
CDMA (USA and Canada only)
2G GSM (all regions except USA and Canada)
4 to 20 cm H
O
2
4 L/min
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Water tub
7. Device
8. Inlet filter
5 years
2.5 years
6 months
Nominal system output AH
Setting 8
Setting 4
100
6
100
6
90
6
1
2
, BTPS
Setting 8
>10
>10
>10
English
17

Publicidad

loading