UFESA PR Everest Manual De Instrucciones página 17

To protect against risk of electric shock, do not immerse the cord, plug or cooking unit in
water or any other liquid. Unplug from outlet when not in use and before cleaning. Allow
to cool before cleaning appliance.
The use of accessory attachments not recommended by the manufacturer may result in
fire, electrical shock, or risk of injury to persons.
Do not use outdoors or for commercial purposes. Do not let power cord hang over the edge
of the table or counter, or touch hot surfaces. Do not place on or near a hot gas or electric
burner or heated oven.
Unplug the unit when finished using. Do not use appliance for other than intended use.
To reduce the risk of electric shock this appliance has a grounded plug. If the plug does not
fit fully into the electrical outlet contact a qualified electrician. Do not modify the plug in
any way or use an adaptor.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or
objects, for the non-observance of these warnings.
INSTRUCTIONS FOR USE BEFORE FIRST USE
Remove all packaging. Clean the cooking plates by wiping a sponge or cloth dampened in
warm water. Do not immerse the unit and do not run water directly on the cooking surfa-
ces. Dry with a cloth or paper towel. For best results, lightly coat the cooking plates with a
little cooking oil or cooking spray.
Notice: When your Contact Grill is heated for the first time, it may emit slight smoke or
odor. This is normal with many heating appliances. This does not affect the safety of your
appliance.
HOW TO USE
Before using the appliance for the first time, peel off any promotional materials and pac-
kaging materials, and check that the cooking plates are clean and free of dust. If necessary,
wipe over with a damp cloth. For best results, pour a teaspoon of vegetable oil on to the
non-stick plates. Spread over with an absorbent kitchen towel and wipe off any excess oil.
PREPARING YOUR CONTACT GRILL
1. Close the Contact Grill and plug it into the wall outlet, the buzzer will sound once and
all lights will flash once, then, only power button (12) and power light (7) will flash.
2. Press the power button (12), preset programs (14) and temperature button light (1) turn
on, Power light (Pre heating) (7) flashes. Now you can choose one of the preset programs
or use it manually.
WORKING WITH PRESET PROGRAMS
Press your desired program button, the light will be on and the rest turn off. Preset tem-
perature for this program will appear in Temperature display (3), then Power light (Pre
heating) (7), OK button (13) and Temperature display (3) will flash.
After 5 seconds, it will automatically enter in preheating mode, or directly push OK button
(13) for preheating.
17