Publicidad
Idiomas disponibles
Idiomas disponibles
13. Engage
belt tension
rod (K) on locking
bracket
(L).
,& CAUTION:
Belt tension
rod is spring
loaded.
Have a tight grip on rod and en-
gage slowly.
14. Raise attachment
lift lever to highest
position.
15. If necessary,
adjust gauge wheels
be..
fore operating
mower as shown in the
Operation
section
of this manual.
TO LEVEL
MOWER
Make sure tires are properly
inflated
to
the PS! shown on tires.
If tires are over
or under inflated,
it may affect the appear-
ance of your lawn and lead you to think
the mower is not adjusted
properly.
VISUAL
SIDE-TO-SIDE
ADJUSTMENT
1. With all tires properly
inflated and if
your lawn appears
unevenly
cut, de-
termine
which side of mower is cutting
lower.
NOTE:
As desired,
you can raise the low
side of mower or lower the high side°
2o Go to side of mower you wish to adjust.
3.
With a 3/4" or adjustable
wrench,
turn
lift link adjustment
nut (A) to the left
to lower the mower,
or, to the right to
raise the mower.
Turn nut right
to raise mower
Turn nut left
to lower mower
NOTE: Each full turn of adjustment
nut will
change
mower height about 3116".
4.
Test your adjustment
by mowing
some
uncut grass and visually
checking
the
appearance°
Readjust,
if necessary,
until you are satisfied
with the results_
PRECISION
SIDE-TO-SIDE
ADJUSTMENT
I.
With all tires properly
inflated,
park
tractor on level ground
or driveway
CAUTION:
Blades
are sharp. Protect
your hands with gloves and/or wrap blade
with heavy cloth°
2.
Raise mower to its highest
position.
3.
At both sides of mower,
position
blade
at side and measure
the distance
(A) from bottom edge of blade to the
ground. The distance
should
be the
same on both sides.
22
Publicidad
