AMSTRAD SRX 350 Manual De Instrucciones página 24

CONNECTING TOA TV
(WITHOUT A VIDEO RECORDER)
NOTES
- | Connect receiver's RF OUT socket to TV's aerial socket using cable provided.
- | When connecting feeder cable from dish to receiver, tighten the outer nut by hand - do not use a spanner
or pliers.
- If connecting just one dish and LNB to receiver, use LNB A socket.
- _ If connecting two LNBs to receiver, use LNB A socket for Astra LNB, and LNB B socket for other LNB.
- — If LNB connection is short-circuit, red and green front panel lights will flash together when receiver is
switched on.
- _ If your TV has a 21-way SCART socket, connect it to receiver's TV SCART/PERITEL socket.
FURTHER INFORMATION - SECTION I5B
GB - 3