Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING TOA TV
AND VIDEO RECORDER
NOTES
-
Your TV and video recorder should be connected together in the conventional manner.
-
Connect receiver's RF OUT socket to video recorder's RF input (aerial) socket using cable provided.
-
When connecting feeder cable from dish to receiver, tighten the outer nut by hand - do not use a spanner
or pliers.
-
If connecting just one dish and LNB to receiver, use LNB A socket.
-
If connecting two LNBs to receiver, use LNB A socket for Astra LNB, and LNB B socket for other LNB.
is
If LNB connection is short-circuit, red and green front panel lights will flash together when receiver is
switched on.
e
If your TV has a 21-way SCART socket, connect it to receiver's TV SCART/PERITEL socket.
-
If your video recorder has a 21-way SCART socket, connect it to receiver's VCR SCART/PERITEL socket.
FURTHER INFORMATION - SECTION I5B
GB - 4
Publicidad
