Front Panel Control; How To Adjust A Setting - Philips 105S51/98 Guía Rápida De Comienzo

Front Panel Control

• Power Switch: Press this knob to switch ON/OFF of monitor's power.
• MENU
:
Active OSD menu or function adjust confirm.
• Contrast
/ :
Adiust contrast or function adjust.
• Brightness
/ :
• EXIT: Press the EXIT key to inactive OSD menu.
• Power Indicator:
Green — Power On mode.
Orange — Off mode.

How to adjust a setting

The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
Figure 4
Note:
If adjustment or selection of any OSD menu is not made for more
than 10 seconds, the current setup will be saved and the OSD will disappear
automatically.
Adjust brightness or function adjust.
H: 31.4KHz V: 70.0Hz
Contrast
100
9300
6500
720 × 400
The OSD Message
6