Panasonic NN-N950 BA RPH Manual De Instrucciones página 10

1
OfM
p'4> - -d $
&
Manual
Lcl S olail IO
IJIHUse Your Oven! jJJ||
l(PowehMTIme§etting)i
1. Plug into a properly grounded electrical outlet.
Display Window
The oven automatically displays
' weights in imperial (oz/lb).
2. If you wish to use metric (g/kg):
-\
Start
Press Start to convert to metric.
Verify your selection in the
Display Window.
Colon appears in
Display Window.
Now enjoy cooking with your Panasonic microwave.
3.
Reset
Press.
88-88
This feature allows you to display the time of day.
The oven will operate without setting the clock.
Example: To set 12:34
am
or
pm.
1.
dock
Press.
3 7j
4
± Jj
7
»
IW 5 mI
Enter time of day
using number pads.
3.
Clock
Press Clock again
to set time of day.
Display Window
Colon flashes.
'&3 H
Colon continues
flashing.
Colon stops flashing.
NOTES:
1. To reset the clock, repeat step 1 through 3.
2. The Clock will retain the time of day as long as electricity
is supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while colon is flashing.
This feature allows you to manually set the power and time
for microwave cooking.
Press Power Level pad until desired power appears in the
Display Window. See Chart below.
Example: To cook at P 6 (MEDIUM) Power for 1 minute
30 seconds.
.
(Power
1
•
Level
Press five times.
Enter cooking time
using number pads.
Display Window
counts down.
Press.
i 2 3
4
5 6
7
8
9
0 CW
Start
V_✓
At the end of cooking,
five beeps sound and
Display Window
P 6
1-30
US
or I8-3H
Colon Time of day
appears.
Press
Power Level
Power Level
once
P10 (HIGH)
twice
P 9
3 times P 8
4 times P 7 (MED. HIGH)
5 times
P 6 (MEDIUM)
6 times P 5
7 times P 4
8 times P 3 (MED. LOW)/ DEFROST
9 times P 2
10 times
_
P 1 (LOW)
NOTES:
1. For more than one stage cooking, repeat steps 1 & 2 for
each stage of cooking before pressing Start pad.
Maximum number of stages for cooking is 5 stages.
2. When selecting P10 (HIGH) power for the first stage, you
may begin at step 2.
3. Two beeps will sound between each stage of
programming. Five beeps will sound at the end of the
entire sequence.
4. When selecting P10 (HIGH) power, the maximum
programmable time is 30 minutes. For other power levels,
the maxtmium time is 99 minutes and 99 seconds
5. For reheating, use P10 (HIGH) for liquids, P7 (MEDIUM-
HIGH) for most foods and P6 (MEDIUM) for dense foods.
6. For defrosting, use P 3 (MEDIUM-LOW).
8
-