Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
5.
Align the hole in the bottom of the grilles, and then close all the clips to attach the
grilles together. Make sure the clips are properly closed on the rims.
6.
Insert the small screw (A) into the hole and tighten the nut (both supplied) on the
back to lock the guards.
Use
1.
Place the fan upright on a dry, level and stable surface.
2.
Make sure the fan is properly assembled.
3.
Plug the power cable into a suitable mains socket.
4.
Press the desired speed button (L) to turn on the fan.
0 (Off)
1 (Low)
2 (Medium)
3 (High)
5.
To turn the fan off, press "0".
6.
To start the automatic left-right oscillation, press down the Oscillation knob (H). To stop
the oscillation function, pull up the knob.
7.
To adjust the vertical tilt of the fan head, press "0" to turn off the fan first. Hold the
bottom of the fan head with one hand, and slowly turn the Tilt adjustment knob (J) anti-
clockwise to loosen the fan head. Adjust the fan head to the desired tilt and tighten the
Tilt adjustment knob.
8.
To adjust the height of the fan, turn off the fan. Loosen the height adjustment collar (O)
by turning it anti-clockwise, adjust the height of the fan and retighten the collar.
CAUTION
Always turn off the fan before adjusting the tilt or height of the fan.
9.
Turn off the fan after each use. Unplug the fan from the mains socket if it is not going to
be used for a long period of time.
16
EN
Publicidad
