Machine Components; Safety Instructions - HSM 450.2 Instrucciones De Servicio

HSM 450.2
1. Proper use, warranty
The paper shredder is intended only for
shredding normal paperwork (e.g. archive
fi les, EDP lists, contents of waste paper bins)
and a small quantity of credit cards, CDs,
fl oppy disks. The stur dy cut ting me cha nism
is un af fected by stap les and pa per clips.
We provide a warranty for the device in ac-
cordance with our general sales and delivery
terms. This warranty excludes wear, damage
due to improper handling, natural depreciati-
on, and actions taken by third parties.

2. Machine components

4
1
3
7
8
1 Main switch
2 Emergency-stop pushbutton
3 Membrane keyboard
4 Filling drum
5 Drum handle
6 Funnel fl ap
7 Folding tray
8 Front door
9 Paper feed slot
10 Name plate
0602
Paper shredder

3. Safety instructions

• Read all instructions before start-up of the
paper shredder. Save these instructions
for later use.
• Follow all warnings and instructions marked
on the product!
• Make sure no liquid is spilled on or in the
paper shredder.
• Do not attempt to repair this paper shredder
yourself.
• If the shredder is damaged or does not
function properly, switch the device off, pull
out the mains plug and inform our service
engineers.
• Keep paper shredder out of the reach of
children.
• This shredder should be operated only with
an operator in attendance.
10
5
6
2
9
english
Risk of injury!
Do not reach into the paper
feed slot.
Risk of injury from slivers!
Wear protective goggles when
destroying diskettes, CDs and
hard credit cards.
Risk of injury by pulling in!
Keep long hair, loose articles of
clothing, ties, scarves, jewellery
etc. away from feed opening.
Material with the tendency to
form loops, e.g. tapes, strap-
ping material, etc. must not be
shredded.
9