Descargar Imprimir esta página

Clatronic KM 3118 Instrucciones De Servicio/Garantía página 35

Amasadora

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
Unpacking the appliance
Remove the appliance from the box and all the enclosed
accessories.
Do not through the packaging away, but keep it together with
the inner packing and the warranty documents for the whole
life of the warranty.
Place the appliance on smooth, level and stable work
surface.
Do not insert the appliance plug without installing the
necessary attachments.
In order to remove any contamination from the production
line please clean the mixing bowl (1) and other accessories
before initial use in a soapy water solution.
Dry well all the parts after washing.
Instructions for Use
Attachments, Speeds and Operating Times
for max. 1.2 kg of mixture:
Product/Type
Max.
of Preparation
Quantity
Heavy mixtures
(e.g. bread
1 kg
dough or short
pastry)
Light mixtures
(e.g. sponge
1,2 kg
mixture)
Sponge mix-
ture or waffl e
1 l
mixture
With heavy mixtures, do not operate the machine for more
than 10 minutes, and then allow it to cool down for a further
30 minutes.
Depending on the consistency of the mixture it is necessary
to remove the mixture from the edge of the mixing bowl and
place it back on the kneading attachments. To this purpose
you can turn the bowl by hand and use the dough scraper
(22). The device must be turned off.
TURBO Switch (11)
In order to switch the device to the maximum speed for a short
time press the TURBO button.
CAUTION:
Do not use this function for more than 1 minute!
Cable winding device
The mains lead should only be pulled as far as the stop. Under
no circumstances should you pull the lead with force as this may
damage the cable take-up. Said damages are not covered by
the warranty.
Winding
Press the cable winding button Retract (13) and guide the
cable. Hold the cable to avoid wrapping.
05-KM 3118 35
Max.
Utensil
Speed
Operating
Time
Dough
min
First min.
hook
medium
2 min.
8 to
Beater
medium
10 min.
min-
5 to
Beater
medium/
10 min.
turbo
NOTE:
The mixing bowl does not have its own drive. It is turned as a
result of the movements of the attachments in the items being
mixed, or you can turn it by hand. Clean the edge from time to
time with the dough scraper (22).
During operation no objects such as spoons, the dough
scraper or your hands should touch the rotating whisks or
dough hook!
Danger of injury!
Do not press the RELEASE button (5) during operation.
Assembly
1. Please ensure that the ON/OFF switch (9) is turned to
„OFF".
2. Place the turntable (2) into the fi xture (4) for the large bowl.
Place the mixing bowl on the turntable.
3. In order to lift the arm, press the RELEASE button (5) and
pull the arm upwards. Assemble the desired attachment (20,
21) by inserting the upper end into the openings provided on
the arm.
The dough hook with the curved washer on the shaft
can only be inserted into the „ k " opening and the
dough hook with the hexagon only into the correspon-
ding opening marked „ ".
The whisks can be inserted into any openings. Please
ensure that the attachment locks into place.
4. Weigh the ingredients with the integrated kitchen scales.
Now fi ll in your ingredients.
5. Do not overfi ll the device; the maximum quantity of ingredi-
ents is 2 kg.
6. Lower the arm by means of the button (5).
Electrical Connection
Pull the lead out of the compartment. Insert the mains plug into
a properly installed 230 V/50 Hz safety power socket.
Operation
Turn the control (12) to min initially. Move the ON/OFF
switch (9) to ON.
CAUTION: The device is already switched on!
The control lamp (10) remains on and shows that the device
is working.
Turn the control (12) to a speed between Min and Max
(depending on the mixture).
After you have fi nished kneading / mixing, move the switch
(9) back to the „OFF" position as soon as the mixture or a
ball of dough has formed. Then remove the mains plug.
Press the RELEASE button (5) and pull the arm upwards.
The inserted tool can be removed by pressing the eject
button (8).
The fi nish dough can be loosened with the dough scraper
supplied and taken out of the mixing bowl.
Remove the mixing bowl.
Clean the parts as described under „Cleaning".
35
27.02.2007, 12:21:28 Uhr

Publicidad

loading