Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL
THE HOOD
1. Hang the hood from the brackets through
the rectangular
cut-outs on the back of
the hood. Cut-outs
are larger
than the
brackets to allow for horizontal adjustment.
The bottom of the hood should be 24" to
30" above the cooking surface.
2. Height adjustment
screws provide vertical
adjustment.
3. Depth adjustment
screws
provide hori-
zontal adjustment.
4. Secure the hood with mounting screws.
Use drywall anchors, provided, if wall studs
or framing are not available.
RECTANGULAR
MOUN_NG
SCREWS
WALL
FRAMING
MOUNTING SCREWS
HEIGHT ADJUSTMENT
SCREWS
WIRING
Note: This range hood must be properly
grounded. The unit should be installed by a
33-7/16"
qualified electrician in accordance with all
(85cm)
applicable
national
and local electrical
max
codes.
GROUNDING
INSTRUCTIONS
This appliance must be grounded. In the event
of an electrical
short
circuit,
grounding
reduces the risk of electric shock by providing
an escape wire for the electric current. This
appliance
is equipped with a cord having a
grounding
wire with a grounding
plug. The
plug must be plugged into an outlet that is
properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician
if the grounding
instructions
are not completely
understood,
or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
Set the electrical power supply within the space covered by the decorative flues.
Position the power socket at a maximum distance of 33-7/16" (85 cm) from where
the lead exits from the hood (see illustration alongside). Make sure this does not
interfere with the decorative flues (where the flue touches the wall).
Fit the plug into the power socket.
-6-
Publicidad
