Rangemaster RM65000 Serie Manual Del Usuario página 6

CONNECT DUCTWORK
1. Use screws and drywall anchors (supplied)
to secure flue mounting bracket to the
ceiling and wall as shown.
2. Use 6" round metal duct to connect the
discharge collar on the hood to the
ductwork above.
3. Use duct tape to make all joints secure
and air tight.
4. Insert the decorative flues setting them on
the hood.
5. Push the lower flue downwards making it
fit properly.
6. Extend the upper flue to the ceiling and
secure with two mounting screws.
FLUE MOUNTING BRACKET
I
t---_
MOUNTING
SCREWS
FASTEN FLUE TO
BRACKET WITH MOUNTING SCREWS
DECORATIVE
J FLUE
DUCT TAPE
6"ROUND
METALDUCT
-7-