Publicidad
Listening to music files in USB
memory
II
Connect a USB memory using the
USB connector.
B
Switch to the USB mode.
For details, refer to "Switching Audio
Modes" on page 14.
II
Operate the USB music file player.
The procedure for playing music is the
same as that are used to play CDs.
Refer to "How to operate the CD/MP31
WMAlAAC player" (page 22 - 25).
~ATTENTION
If the USB mode is changed to another mode
and then returned to the USB mode, the player
will return to the preVious file played.
~CAUTION
• Do not disconnect the USB memory or turn
the ignition key to ACC OFF position while
accessing the USB memory. Doing so may
corrupt the data.
• Depending on the type connected, the USB
memory may not work in some cases.
• The USB memory does not support multi-
partition. Also, it does not support USB hub.
• It is highly recommended to back up your
data in case of accidental deletion.
• Install and use the USB device in a place
that provides safe operation of the vehicle.
• The music files under the copyright
protection cannot be played.
• When connecting a digital audio player to
the USB connector, additional USB
adaptors may be required.
How to operate the USB music file player
Searching for
a
music file
You can retrieve your desired track in Search
mode.
II
Press the [BAND/ASM] button.
ij
'-ASM
The search mode is activated.
1:1
Press the [BAND/ASM] button to
•
iii
select the search mode item.
,
'-ASM
Search mode items are selected in
the following order.
Track search -+ File search -+
Character search
For Track or File Search
II
Turn the [VOL] button to select the
track number and file number.
II
Press and hold the [SELECT]
button.
Playback of the selected music file will
begin.
For Character Search
II
Turn the [VOL] button to select the
character.
II
Press the [SELECT] button briefly.
The
selected
character
will
be
confirmed.
I!I
Repeat steps (3) and (4) to enter all
iii
of the characters.
I!I
Press and hold the [SELECT]
iii
button.
Playback of the selected music file will
begin.
29
Publicidad
