Publicidad
Various Settings
Making changes with Function Mode
A variety of settings can be changed.
Switching the Function Mode
II
Press the [FUNCTION] button.
The Menu Selection mode is activated.
I!I
Press the [SELECT] button to
II
select the setting item.
When the button is pressed, the
setting item changes in the following
order.
EQ Select
~
BEEP ONIOFF
~
DX/LOCAL*1 ~ AUX
ONI OFF*2
~
Demo
ONI OFF
~
ILLUMINATION
~
EQ Select.. ·
*1: Refer to page 33 for details on
Tuner operation.
*2: Refer to page 44 for detail on AUX
operation.
Making changes with Equalizer
Mode
Using EQ (Equalizer), you can adjust the
frequency according to the genre of the musical
instruments.
a .
Press the [SELECT] button to
select the EQ select.
B
Turn the [VOL] button.
When the button is turned, the setting
item changes in the following order.
EQ OFF
~
Sharp
~
Vocal
~ Power~
Custom
The selected settings will take effect.
38
Setting guide tone (Guide Tone)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
a
Press the [SELECT] button to
select the BEEP ON/OFF.
I!I
Turn the [VOL] button to select the
II
guide tone ON/OFF.
The selected settings will take effect.
rnATTENTION
When an external amplifier is connected, the
guide tone will not sound.
Switching demonstration screen
display (Demo)
Demonstration screen display settings can be
performed. Default setting is ON.
If the demonstration screen display is set to ON,
operation and other screens will be displayed in
succession.
If you press a button while the demonstration
screens are being displayed, the demonstration
screens will be cancelled and the audio operation
screen will be displayed. If you do not operate
the status display function within
15
seconds, the
display will return automatically to the demo
screen.
a
Press the [SELECT] button to
select the Demo.
I!I
Turn the [VOL] button to select the
II
Demo ON/OFF.
The selected settings will take effect.
Publicidad
