Publicidad
Idiomas disponibles
Idiomas disponibles
GRAPHIC
EQUALIZER
DSPSURROUND SYSTEM
--
GEQ
This unit provides the following three different equalization
curves.
ROCK:
Powerful
sound emphasizing
treble
and bass
POP: More presence
in the vocals
and midrange
CLASSIC:
Enriched
sound with heaw
bass and fine treble
Press the GEQ button
repeatedly
until the desired
equalization
curve is displayed,
_>ROCK _-> POP---> CLASSIC-'->EQoFF
J
(cancel)
..................
=.
--SURROUND
The DSP (Digital Signal Processor)
surround
circuits can recreate
the effect of sounds
reflected from walls or ceilings,
to obtain the
sound presence
of real environments.
There
are three
modes
with
matching
graphic
equalization
curves.
Press
the SURROUND
button
repeatedly
until
the
desired SURROUND
mode is displayed.
J
_->DISCO->LIVE -> HALL _-> S-oFF
(cancel)
SOUND ADJUSTMENT
DURING
RECORDING
The output
volume
and tone (except
BBE) of the speakers
or
headphones
may be freely varied
without
affecting
the level of
the recording.
Recording
with BBE
The desired
source
can be recorded
with the BBE function
to
enhance the clarity of high-frequency
sound, When playing back
a tape recorded
with BBE, it is recommended
that BBE be set to
off.
Equalization
curves
are selected
automatically
to match
the
SURROUND
modes
and can also be selected
or turned
off to
suit your preference.
When
the music
source
is monaural
Select
LIVE to obtain a simulated
stereo
effect. When DISCO or
HALL
is selected,
no sound
will be heard
from the surround
speakers.
To cancel the selected mode
Press the selected button again. S-oFF is displayed.
While SURROUND mode is off, no sound is heard from the
surround speakers.
To adjust
the volume
of the surround
speakers
Press the MANUAL
SELECT
button once on the remote control.
"S" is displayed
for 2 seconds.
Press the _1<1 DOWN or UP
I_1_
button on the remote control within these 2 seconds.
• The Dolby Pro Logic surround
speakers
level is also changed.
(See page 17.)
• When
a connected
microphone
ls used,
the SURROUND
system
is automatically
canceled.
• When the DOLBY
PRO LOGIC is turned on, the SURROUND
system is automatically
canceled.
Using
the headphones
Connect
headphones
to the PHONES
jack with a stereo standard
plug (06.3 mm, 1/4 inch),
No sound is output from the speakers
while the headphones
are
plugged
in,
• When the headphones
are plugged in, the SURROUND
system
and the DOLBY PRO LOGIC are canceled.
7 ENGLISH
Publicidad
