Safety Device Of Blade Holder - Nahita ZFP011 Manual De Instrucciones

2. safety handwheel
Before adjusting the section and specimen must be lock the handwheel
The handwheel can be locked in any direction with the locking spanner. The locking spanner can
be set on the locked or released position on the right side of the base. Also can push the rocking
handle at the top position to open or release the locked
Lock of handwhell
1. Convenient locking during manipulating——push the pry bar to the top, the handwheel
can be locked at any position
2. Safety locked be used during the break——face the direction of the handle to push the
hand wheel, shaking to the acme, the lockpin slid into lock tube aumomatic, then the
handwheel been locked

3.2 Safety device of blade holder

Finger protection system which can flip up and down
warning：when operating or changing the specimen, knife and disposal blade,
even during breaks, the cutting edge must be always covered with the knife guard
Manual de instrucciones Instruction manual
Lock
Unlock
2. rocking handle of handwheel
27
Lock
Versión Version 2017
Unlock