Adjustment Of Cutting Angle; Sway Blade Holder - Nahita ZFP011 Manual De Instrucciones

7.3 Adjustment of cutting angle

1. Release tightening handle (1)
2. Turn the blade holder to adjust the angle of blade holder according to different specimen
hardness and section thickness
3. Lock the tightening handle, tighten the blade holder on the base of blade holder

7.4 Sway blade holder

Blade holder(2) can move from side to side,have three anchor point:left,middle,right which
take full advantage of blade to rough slice and fine cut effectively, Meanwhile it can save the loss
of blade and improve the efficiency of work
Manual de instrucciones Instruction manual 36 Versión Version 2017