Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
No more specimen advance
and consequently no section
produced.
Not lighting-up and no
display when turn-on the
power supply switch.
10. Cleaning and maintenance
Warning: lock handwheel before cleaning and maintenance instrument and unload blade holder
and blade.
10.1 Disassembly of blade holder
1. Release the set lever of blade holder on microtome base and carry down subassembly of
blade holder
2. Release set lever of blade (1), carry down blade carefully
3. Release set lever of blade (2), pull out blade holder in lateral direction
4. Release set lever of slide carriage (3), unload slide carriage of blade holder
Manual de instrucciones Instruction manual
-Insufficient
clamping
paraffin
forceps
carrier.
- Specimen reached the front
feed limit.
- The coarse feed wheel
cannot rotate freely.
Fuse is burned
43
-Check if all levers are locked
of
and screws are tightened on the
or
knife
specimen and knife carrier
systems. Retighten the clamps
and screws if necessary.
- Turn the coarse feed wheel in
the appropriate direction to
move the specimen towards the
clearance limit.
- Remove the obstruction.
Replace the fuse
Versión Version 2017
Publicidad
Capítulos
Tabla de contenido
