Lenco CD-500 Manual De Usuario página 15

some interruption of sound output will occur. This is normal. The sound will resume once the unit is stabilized from the
shock or vibration.
Note:
- The anti-skip function provides for continues sound output when the unit is subjected to shock or vibration. It will
not compensate for errors arising from the use of defective, scratched or dirty discs.
BLUETOOTH TRANSMIT OPERATION
The Bluetooth transmit function allows the unit's sound (DAB, FM or CD) wireless transmit to the Bluetooth wireless
device for example wireless speaker.
1. During the DAB or FM or CD mode, press and hold the BT TX button
to start searching the closest available Bluetooth device. "BT:TX" will be
shown on the screen display bottom area in which the portion "TX"
is flashing to indicate searching the Bluetooth speaker in progress.
They will be automatically connected and the sound will transmit to the
Bluetooth speaker.
2. Press and hold the BT TX button again will turn off the Bluetooth transmit
function.
Note:
- Please note that it needs a longer time when connecting the device for the first time.
- Except the Bluetooth device that you want to pair, it is recommended not to turn on other Bluetooth devices
within 10 meters during pairing. If the pairing is not successed, please check if there is other Bluetooth decices
nearby. Or you can locate the discman closer (for example within 3 meters and no blocking between them) to the
Bluetooth device and try to do pairing again.
- If you move out of Bluetooth range (10 meters) between the unit and the Bluetooth device, the "TX" indicator on
the display will begin flashing. Move the unit or your Bluetooth device back within range and reconnect the
Bluetooth device if necessary.
- If there is no Bluetooth device searched within 2 minutes, the Bluetooth transmit function will be turned off
automatically.
BBS
You can enhance the bass effect of the music. Press the BBS button will toggle the bass boost between ON and OFF.
15