Publicidad
Idiomas disponibles
Idiomas disponibles
TAPE PLAYBACK
Switching modes
When the unit is in Radio or CD Changer Play
mode, inserting a cassette switches the unit to
Tape Play mode automatically.
To prevent tape problems
Before inserting a cassette into the unit, make
sure that thereis no slack in the tape. If necessary,
take up the slack by inserting a pencil into the
spindle hole and winding.
Tapes of 90 minutes or longer are extremely thin
and easily deformed or damaged. They are not
recommended.
SOUND ADJUSTMENTS
MUTE
1
Press SEL to select the mode that you
wish to adjust from: VOL (volume),
BASS (bass), TRE (treble), BAL
(balance) and FAD (fader).
The following indications appear in cyclic
ri/DL^R5^Tf?E^HL-*rn]]1
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
2 Press +/— to adjust the level.
Press and hold either button to change the
level rapidly.
-
+
VUL
Decreases the
volume level
Increases the
volume level
3R55
Decreases the
Increases the
bass level
TRE
Decreases the
treble level
Increases the
treble level
3RL
Decreases the
level of the right
speaker(s)
Decreases the
level of the left
speaker(s)
FR2
Decreases the
level of the front
speakers
Decreases the
level of the rear
speakers
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/-.
MUTE button
Press this button to temporarily lowerthe volume.
Press it again to restore the previous volume.
Publicidad
