Publicidad
Idiomas disponibles
Idiomas disponibles
TUNEV/A
CD BAND
MUTE
DIR LO
To turn the unit off
Press and hold MUTE for more than 2 seconds.
Note
The unit turns on in the last mode selected when
you turned off the unit with the exceptions of
pressing the following buttons.
• Pressing DIR turns on the unit in Tape Play
mode.
• Pressing CD turns on the unit in CD Changer
Play mode.
• Pressing BAND turns on the unit in Radio mode.
Switching modes
When the unit is in Radio or CD Changer Play
mode, inserting a cassette switches the unit to
Tape Play mode automatically.
LO (local/DX) button
You can use Local mode when you wish to tune
in only strong stations during seek tuning. In
Radio mode, press LO to select Local mode. The
"LO" indicator lights up.
• Press LO to cancel Local mode and switch to
DX (distance) mode.
•The "ST" (stereo) indicator lights up when the
tuned-in station is broadcasting in stereo and
the reception is good.
PRESETTING STATIONS
1
Press BAND to select a desired band
from among FI (FM1), F2 (FM2), F3
(FM3), A1 (AMI) and A2 (AM2).
F I-IDS 1
2 Press and hold A.ME for more than 2
seconds to activate the automatic
presetting function.
The six strongest available stations will be
stored in memory on the preset station buttons
1 to 6 in order of their signal strength. The "A
MEM" indication appears while the unit is in
this mode.
Use this function to automatically preset up to 6
stations each for FI, F2, F3, A1 and A2 (up to a
total of 30 stations).
•When auto memory is completed, the preset
stations are automatically tuned in for5 seconds
each in order.
•To stop auto memory, press A.ME again.
To check the preset stations (preset scan)
• If you wish to check the preset stations, press
A.MEforlessthan2seconds.Thepreset stations
stored in memory will be tuned in for 5 seconds
each in order.
• To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6.
ENGLISH 6
Publicidad
