Publicidad
Idiomas disponibles
Idiomas disponibles
Slide rack down intoplace. I nsert screw
at(D)andtighten w itha Phillips s crew-
driver.
Storing hose & too|s
Store hose on holder by first positioning
hose in front section of holder.
F
Continue wrapping
hose under lower
hook (E). Snap hose end fully into hold-
er (F).
Ensure that the hose end is pushed
down completely into holder (F).
Position tool in holder at base of cleaner
and snap it into place as shown at
arrow.
Slide bare floor attachment
into holder
as shown.
Powered
hand
tool
The powered hand tool is shipped in a
plastic bag for protection.
Remove the
bag before using the tool by first open-
ing tool door.
H
To remove powered hand tool (G), pull it
down and outward.
To reposition the tool, reverse this pro-
cedure.
To remove the scrub module (H), grasp
it at the sides and pull it forward.
To reposition module, fit tabs in the stor-
age area into holes on back of module.
Push module to snap it securely into
position.
This is the proper storage location for
the module.
How
to
reattach
tool
COVEY
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
holes on sides of tool storage area.
Continued
_
5
Publicidad
