Smeg FM24 Guía De Instrucciones página 16

GENERAL DESCRIPTION
Function
selector
knob
Start-Timer
Turntable
off
button
• THE TURNTABLE ;
ensures equal cooking of food throughout with no need to intervene.
• It may be used as a cooking dish,
■ Rotation is controlled by the drive shaft and the wheel support.
• The turntable rotates in both directions.
■ If It does not turn, verify that all components are properly positioned.
• THE WHEEL SUPPORT :
Do not try to rotate the roller ring manually, as you could damage the drive system.
If It does not turn smoothly, make sure that there is nothing in the well beneath the
• MICROWAVE OUTPUT POWER : 900 W
30
USING YOUR MICROWAVE OVEN
Program your microwave oven using the function selec¬
tor knob, together with the start-timer.
After connecting your microwave oven ;
- Open the door, place the food to be cooked inside the
microwave oven and close the door.
Make ajre the door is properly closed otherwise the
oven will not operate.
■ Select the power setting with the function selector
knob.
- Select the time using the start-timer
E
.
When you wish to program less than two minutes,
turn the timer beyond 2, then come back to the desired
setting.
- If using a large dish, press the turntable off button
When off. remember to turn the recipient or stir the
contents. After use, remember to press again to
unlock the turntable.
- Close the door, the turntable revolves, the oven light
com« on, the program begins.
The end of the program is indicated by a bell. The oven
stops, the light goes off.
- If you open the door before the end of a program ;
If the dish rs ready, turn the start-timer back to the "0"
position before closing the door. Otherwise, close the
door if you wish the program to continue.
Never t^ate the oven when empty.
31