Descargar Imprimir esta página

cecotec Bolero GrandSommelier 830 COOLCRYSTAL Manual De Instrucciones página 25

Bodega puesta a temperatura termoeléctrica de 8 botellas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
ENGLISH
below to ensure proper heat dissipation:
1.
Leave at least 200 cm
of free space around the appliance.
3
2.
Leave at least 20 mm of free space between the wine cooler and the rear wall.
Leave at least 50 mm of free space between the sides of the appliance and other walls
3.
of devices.
1.
Ensure constant air circulation around the wine cooler.
-
Place the appliance on a solid, flat surface to keep it stable, or vibrations and noises will
occur. Make sure that the appliance is level by adjusting the height with its legs. If possible,
do not place the appliance directly on the ground.
-
Wait at least 2-3 hours before plugging the appliance into a power outlet and storing
bottles inside. Clean the inside with a soft cloth and lukewarm water. Check that the
shelves are correctly positioned.
-
Installation is recommended in a location with an ambient temperature between 16 and
32 °C. A lower or higher temperature than indicated may affect optimal operation of the
appliance.
It is not advisable to use the wine cooler if ambient temperature is below 10 ºC.
-
-
A water container can be placed inside the appliance to maintain humidity.
4. OPERATION
This appliance has a temperature control on the front. You can adjust the temperature between
8 and 8 °C (46-64 °F). The internal temperature may be affected by factors such as the location
of the appliance, the ambient temperature, the door opening frequency, etc.
Control panel. Fig. 2
1.
Unlock icon
2.
Temperature Unit Selection and Light On/Off icon
3.
Temperature indicator
Temperature increase icon
4.
5.
Temperature decrease icon
Switch-on
Plug in the appliance. Set the desired temperature using the temperature increase or decrease
buttons.
Please note
After setting the temperature, the temperature display will show the internal temperature of
the appliance, which will gradually change until the set temperature is reached.
B O LE R O G RAN DSOM M ELIER 83 0 CO OLCRYSTA L/ COOLWOO D
48
Temperature unit selection
Touch the Temperature Unit Selection and Light On/Off icon for 2 seconds (approx.) to switch
between degrees Fahrenheit (°F) and degrees Celsius (°C).
Light on/off
Touch the Temperature Unit Selection and Light On/Off icon to switch the interior light on or
off. Touch the icon again to turn it off. The light will automatically switch off after 10 minutes.
Locking the control panel
-
The control panel has an automatic locking system that activates after 20 seconds of
inactivity (without touching any icons).
-
Touch the unlock icon for 2 seconds (approx.) to unlock the control panel. A beep will sound,
indicating that the control panel is unlocked.
-
All icons will be inactive after locking the control panel.
NOTE:
Upon first switch-on of the wine cooler or after a period of inactivity, there may be a
considerable difference between the selected temperature and the temperature indicated on
the control panel. This is normal, and the appliance will reach the selected temperature after
a few hours of operation.
5. STORAGE TIPS
-
This appliance is intended to be used exclusively for wine preservation.
Wine coolers are designed to store a maximum of 8 standard-size bottles (750 ml capacity
-
Bordeaux), with 2 bottles per shelf.
-
You can store larger bottles, as long as they do not prevent the door from closing properly.
-
Capacity can vary depending on storage method or bottle size.
Wines and suggested temperatures:
Temperature (ºC)
Red wine
14-18
Dry/white wine
9-14
Rose wine
10-11
Sparkling wine
5-9
B OLERO GRAN DS OMMELIER 830 CO OLCRYS TA L/ COOLWO OD
ENGLISH
Temperature (ºF)
57-64
48-57
50-52
41-48
49

Publicidad

loading

Este manual también es adecuado para:

Bolero grandsommelier 830 coolwood0270702708