Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING PROCEDURE
NB: Do not make any quick settings (date or moon phase) after an anti-clockwise time-setting
operation. If a quick setting is made after an anti-clockwise time-setting operation, you will
need to wait approximately 20 minutes or recorrect clockwise.
Setting the time
1.
Pull the crown to Position 3.
2.
Turn the crown to advance the hands (A, B) clockwise and position them at the desired time.
Note: When the hands pass the numeral 12, if the date changes, it means it is midnight and if the date
does not change it means it is noon.
3.
When the start of the set time is announced (reference clock, radio, etc.), reset the crown to Position 1.
Quick date setting
1.
Pull the crown to Position 2.
2.
Turn the crown to advance the date (E) chronologically, until the desired date appears.
3.
Reset the crown to Position 1.
For months with less than 31 days, the date must be changed manually at the end of the month.
Quick moon phase setting
1.
Pull the crown to Position 2.
2.
Turn the crown to rotate the moon-phase disc (I) by jumps until the full moon appears in the center
of the aperture.
3.
Continue turning the crown in order to bring about as many jumps as days have passed since the
last full moon (consult a calendar).
4.
Reset the crown to Position 1.
GENERAL INFORMATION
Care recommendations
Your Baume & Mercier watch was both designed and manufactured with great care. Please read our
recommendations for use and care on www.baume-et-mercier.com.
International warranty
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.
The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Other information
If you have any questions, please visit our website www.baume-et-mercier.com.
You can also contact our authorized retailers in your country (list available on our website www.baume-
et-mercier.com) or contact us directly via our website using the contact form or by calling one of our
Client Relations Centers (www.baume-et-mercier.com/customer-service/contact-us.html).
Setting procedure – Automatic - hour, minute, central seconds, date, moon phase
5
Publicidad
