Publicidad
Idiomas disponibles
Idiomas disponibles
OTHER FUNCTIONS OF
THE DRIP COFFEE MAKER
"4 cups"
If you wish to prepare less cups of
coffee, use the button with the "cup"
icon
. The Plissé drip coffee
maker prepares only 4 cups of coffee
instead of 10.
When the function is selected, the
icon is visible on the display.
Having prepared the machine, press
the button with the "cup" icon
and then press the ON/OFF button
to operate the appliance. The ON/
OFF button LED is on, and the "cup"
and "drip" icons
on the display
are on (start dispensing). (fig 9)
At the end of the coffee preparation
cycle, the icons and the LED on the
ON/OFF button switch off.
"Aroma Plus"
For coffee with a more intense aroma,
use the button with the "coffee bean"
icon
.
The shower diffuser dispenses the
water more slowly, the water pene-
trates the coffee powder more slowly
and the coffee flavour is more intense.
When the function is selected, the
icon is visible on the display.
Having prepared the machine, press
the button with the "coffee bean"
icon
and then press the ON/OFF
button to operate the appliance. The
ON/OFF button LED is on, and the
"coffee bean"
and "drip" icons
on
the display are on (fig. 10).
At the end of the coffee preparation
cycle, the icons and the LED on the
ON/OFF button switch off.
"4 cups and Aroma Plus"
You can set the Plissé drip coffee
maker to reduce the number of cups
with a more intense aroma.
Having prepared the machine, press
the button with the "cup" icon
and then press the "coffee bean"
icon
, then the ON/OFF button
to operate the appliance. The icons
and ON/OFF button LED are on.
The "drip" icon
also appears on the
display. (fig. 11)
At the end of the coffee preparation
cycle, all the icons and the ON/OFF
button switch off.
"Automatic start"
The Plissé drip coffee maker can be
programmed to make fresh coffee
ready for you when you wake up.
ATTENTION!
Attention: before setting the
automatic start always remember
to prepare the machine with coffee
in the filter and water in the tank.
Always place the jug on the heating
base. (See paragraph "Using the drip
coffee maker").
• Press the "Programming" button,
with the "clock" icon
. The
LEDs indicating the hour and
minutes on the display flash.
After a few seconds, they switch
off and the set time 8:00 appears
on the display.
• To set the required time, press
until the correct hour appears and
then press
to set the minutes.
The LEDs will flash during this
operation.
• Having set the time, wait for
approx. 5 seconds; the time set
for the automatic start will be
confirmed automatically.
• After 5 more seconds, the current
time will appear on the display
again.
The "clock" icon
will remain lit
on the display to indicate that the
automatic start has been set on the
machine. (fig. 12)
22
At the set time, the appliance switches
on and starts to prepare the coffee.
At the end, the coffee temperature
maintenance cycle starts, and then
switches off automatically.
During the coffee preparation and
dispensing, the LED on the ON/OFF
button and the "drip" icon
on the
display are on.
When the coffee temperature main-
tenance cycle starts, the red LED on
the ON/OFF button flashes slowly
and the machine emits 3 beeps. The
icons on the display are switched off.
The machine automatic start time
can be changed by repeating the set-
ting steps. Press the button with the
"Programming" ico
for approx. 3
seconds and then change hour and
minutes.
The "automatic start" function can be
disabled by pressing the "Programming"
button once; the "clock" icon
switches off. The current time appears
on the display.
HOW TO CARE FOR THE
DRIP COFFEE MAKER
Always switch off the appliance and
remove the plug from the socket
before cleaning and maintenance
operations.
Always make sure the machine has
cooled down.
• Filter holder (G) and filter (H):
wash the filter holder with warm
water and washing-up liquid
without abrasive substances after
each use. Only rinse the filter
under running water. Dry thorou-
ghly with a soft cloth. Take care
not to damage the mesh filter.
They are not dishwasher safe.
• Shower diffuser (F): clean the sho-
wer diffuser delicately with a non-
abrasive sponge.
• Tank (B): rinse under running
water and dry the outside with a
soft cloth before returning to its
seat. It is not dishwasher safe.
• Jug (I): wash with warm water and
washing-up liquid without abrasive
substances after each use. Rinse
thoroughly to remove any detergent
residues and dry with a soft cloth.
• The jug may be washed in the
dishwasher, place in the upper
basket to prevent the high tempe-
ratures reached during the washing
cycle from damaging the thermo-
plastic parts of the jug (cover and
handle).
The jug lid can be removed for
easier washing.
• Pull the lid upwards to slide the 2
pins out of their seat.
• To replace the lid, match up the
2 pins with their seat and push
downwards. (fig. 13)
• Machine body (A): the outer sur-
face of the appliance must be clea-
ned ONLY with a damp cloth and
then dried thoroughly with a soft
cloth.
• NEVER immerse the coffee machi-
ne body in water or any other
liquid.
Note : Any other servicing should be
performed by an authorized service
representative.
HOW TO REMOVE
LIMESCALE
Limescale (calcium carbonate) is a
harmless natural mineral found in
water.
Limescale is not harmful to health,
but can give the drink an unpleasant
flavour.
Frequent maintenance improves
the functional performance of the
appliance. If you use the drip coffee
maker regularly (at least two full jugs
of coffee a day), remove the limescale
from the appliance every 1-2 months.
23
Publicidad
