Publicidad
Idiomas disponibles
Idiomas disponibles
Description
1.
Front handle For holding and controlling the machine.
2.
Trigger switch lockout Locks trigger switch in the off
position until you have a proper grip with your hand and
press the lockout in order to prevent the accidental op-
eration.
3.
Rear handle Handle located furthest from the cutting
device.
4.
Trigger switch Activated by the operator's finger for
turning the motor on.
5.
Power indicator LED Remains illuminated when power
to unit is turned on. Turns off when power to unit is off.
6.
Power button Press once to turn on power to the unit,
power indicator LED illuminates. Press once more to
turn power off to unit, power indicator LED turns off.
7.
Battery pack
8.
Type and serial number
Description
9.
Motor unit
10. Main pipe Part of the unit that provides a casing for
power transmission shaft.
11. Cutting device That part of the assembly of cutter
blades and shear plate together with any supporting
part, which performs the cutting action.
12. Blunt extension An extending blunt part of the cutting
device.
13. Gear case
14. Handle Adjust the angle of the cutting blade.
15. Lock lever Grip the two locking levers to unlock the
latch, and adjust the cutting blade angle.
16. Blade cover When transporting or storing the product
always fit the blade cover.
14
Publicidad
