Black and Decker NST2018 Manual De Instrucciones

CORDLESS 18 VOLT TRIMMER/EDGER
INSTRUCTION MANUAL
Date Code
Catalog Number
NST2018
Thank you for choosing Black & Decker!
Go to www.BlackandDecker.com/NewOwner
to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If youhavea question orexperience a problem withyourBlack& Decker p urchase, goto
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant a nswers 2 4 hours a day.
If youcan't f indtheanswer o r donothaveaccess totheinternet,
call1-800-544-6986 from8 a.m.to 5 p.m.ESTNon.-- Fri.to speak withanagent.
Pleasehavethecatalog number a vailable whenyoucall.
KEY INFORMATION YOU SHOULD KNOW:
Charge battery for 9 hours before attempting to use your trimmer/edger.
To operate the trimmer, the lock out button must be pulled back.
This is an automatic feed trimmer - Do not bump head against ground.
Use only 0.065 inch diameter line.
Install guard.
Phillips screwdriver required (not supplied) to install guard.
For trouble free feeding and best results, only use Black & Decker
replacement spools with single 0.065 inch line. Black & Decker replacement
spool model number AF-IO0.
VEA EL ESPANOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACION, CENTROS DE SERVIClO Y POLIZA DE GARANTiA.
ADVERTENClA: LI_ASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO,