Black and Decker NST1118 Manual De Instrucciones

TRIMMER / EDGER
iNSTRUCTiON MANUAL
Model Numbers NST1118, NST2118
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri
to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAI_IOL EN LA CONTRAPORTADA.
POUR LE FRAN(_AIS, VOIR LA COUVERTURE ARRIERE.
INSTRUCTIVO DE OPERACION, CENTRO.S DE SERVlCIO Y
POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Model #
NST1118, NST2118
KEY INFORMATION YOU SHOULD KNOW:
The guard must be installed before trimming or edging - if not, the
motor will overheat (page 7).
When replacing the line, use only .065 inch diameter ROUND line
(B&D Model #AF-100 is recommended) - otherwise the tool will
not function properly (page 9).
Do not bump the feed head against the ground - it will disrupt the
feed mechanism.