Troy-Bilt 020210 Manual Del Propietário página 15

Section 5: Maintenance
Pump Maintenance
Changing Pump Oi[
Change oiH after first 50 hours of operation and then every
200 hours or 3 months_ whichever occurs first.
NOTE:When changing pump oil use onHy high quaHity
nondetergent 30 weight oil Use no spedaH additives.
Change pump oi[ as fommows:
H. CHean area around brass oiH drain pHugat bottom of
pump.
2. Remove oiH drain pHug. Drain oiH compHeteHy into an
approved container.
3. When oiH has compHeteHy drained_ instaHH oiH drain pHug
and tighten firmHy.
4. CHean area around pump oiH dipstick. Remove dipstick
and firth pump with recommended oiH to "Furore" mark on
dipstick (typicaHHy 0.43L or H 5 oz.).
5. [nstaHHpump oiH dipstick.
6. Wipe up any spiHHedoil
Data tag information is very important if you need heHp from
our Customer Service Department or an authorized service
deaHer.
o The data tag (Figure H 4) is Hocated on the base of the
pressure washer. For future reference, pHease copy the
model revision, and seriaH number of the pressure washer
in the space beHow.
MODEL [
REV NO [
SERIAL [
PSU [
GPM [
Copy Model
_"_'_ Number Here
_Copy Revision
Here
Copy SeriaH
Number Here
]
41@