Tenda RX27 Pro Guía De Instalación Rápida página 4

Scenario1: Set up the device as a router
I.Connect the router
The "new router" and "router" in this guide refer to the router in the package.
Step 1: Import your PPPoE user name and password into the new router
(Optional)
Tips
This function is only applicable when the connection type of the original router is
PPPoE, except for PPPoE of some special ISPs or PPPoE connection set up manually
with VLAN information.
1. Power on your original and new routers.
2. Connect the WAN port of the original router to a LAN port (1, 2 or IPTV/3)
of the new router using an Ethernet cable. After the LED indicator of the
new router blinks fast for 8 seconds, the PPPoE user name and password
are imported to your new router.
3. Remove the original router.
Power source
Power source
WAN
Original router
01
1 2
POWER WPS Reset WAN 1 2
Ethernet cable
Step 2: Connect the WAN port of the router
Note
If you use the modem for internet access, please power off the modem
first before connecting the WAN port of the router to the LAN port of
your modem.
1. Ensure that the router is powered on.
2. Connect the WAN port of the router to the LAN port of your
modem or the Ethernet jack using an Ethernet cable.
Power source
IPTV/3
IPTV/3
New router
WAN
POWER WPS Reset WAN 1 2 IPTV/3
Modem
Or
Ethernet cable
Ethernet jack
Internet