Costway TM10025 Instrucciones De Montaje página 6

Disposal instructions
•Disassemble and dispose of The equipment in such a way that no
unreasonable hazards will exist at the time the equipment is discarded.
•Follow all your local requirements.
PLAYGROUND AND SURFACE MATERIALS INSTRUCTIONS
•Use containment, such as digging out around the perimeter and/or lining the
perimeter with landscape edging.
•Do not install loose fill surfacing over hard surfaces such as concrete or
asphalt.
•Installation of rubber tiles or poured-in place surfaces (other than loose fill
materials) generally requires a professional and are not "do-it-yourself "
projects.
•Use playground surfacing materials (other than loose fill material) that comply
to the safety standard ASTM F1292 Standard Specification for Impact
Attenuation of Surfacing Materials within the Use Zone of Playground
Equipment.
CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS
Select Protective Surfacing—One of the most important things you can do to
reduce the likelihood of serious head injuries is to install shock absorbing
protective surfacing under and around your play equipment. The protective
surfacing should be applied to a depth that is suitable for the equipment height
in accordance with ASTM Specification F1292. There are different types of
surfacing to choose from; whichever product you select, follow these
guidelines:
Loose Fill Materials—Maintain a minimum depth of 9 inches (23 cm)of loose
fill materials such as wood mulch/chips, engineered wood fiber (EWF), or
shredded/recycled rubber mulch for equipment up to 8 feet (244 cm) high; and
9 inches (23 cm) of sand or pea gravel for equipment up to 5 feet (152 cm)
high.
10
NOTE: An initial fill level of 12 inches (30 cm) will compress to about a 9 inch
(23 cm) depth of surfacing over time. The surfacing will also compact,
displace, and settle, and should be periodically refilled to maintain at least a 9
inch (23 cm) depth. Use a minimum of 6 inches (15 cm) of protective surfacing
for play equipment less than 4 feet (122 cm) in height. If maintained properly,
this should be adequate. (At depths less than 6 inches (15 cm), the protective
material is too easily displaced or compacted.)
**The Maximum fall height for this equipment is 5FT,We recommend using 6"
of Double shredded bark Mulch.**
SAFE PLAY AREA
Place the equipment no less then 6.6ft (2m) from any structre or obstruction
such as a fence, garage, house, overhanging branches, laundry lines, or
electrical wires. The impact surfacing needs to cover the entire recommended
play area.
Play set dimensions:
10'(3.05m) diameter
Recommended Play
area: 23'2(7.07m)
diameter
Recommended age:
3-10 years old
Maximum player: 6 persons
Maximum Weight Of Single User:100 kg
Maximum Total Weight:363 kg
BEFORE BEGINNING ASSEMBLY
Identify and check all parts and hardware using the PART LIST in this
document. Make sure that all parts and accessories are intact and complete
before assembly. Test all bolts by inserting them into their respective holes. Do
not scrape the powder coating. Bare metal may rust! You may need to pound
some bolts with a hammer or mallet.
6.6' (2m)
6.6' (2m)
6.6' (2m)
6.6' (2m)
11