Costway TM10025 Instrucciones De Montaje página 7

NOTE:
•The assembly requires two adults.
For ease of assembly, leave all fasteners finger tight until all tubes are in
place, then tighten firmly
PART LIST
A. Long Tubex30 B. short Tube x30
E. Long Bolt x 16 F. Short Bolt x 10
I. Allen Wrench x 2 J. Double open-end
wrench x 1
M. Strapsx2 N. Swing Seatx1
Tips: part L (Strengthened Tube) is only used in step 4.
ASSEMBLY INSTRUCTION
Dome Climber Assembly
Step 1:Bottom Circle Assembly
First, make a decagon with ten poles (A),
as shown in the following picture.
Second, pick up one pole(A) and one
pole(B), then connect them to one of the
joints of the decagon with a short bolt (F),
a lock nut (K) and two normal washers (H).
12
C. Black Grip x 16 D. Long Nut x 16
G. Thin Nut x 16 H. Normal Washer x36
K. Lock Nut x 10 L.Strengthened Tube x5
A
Tips: The order of the poles needs to be the same as the order marked in the
following picture.
The outermost pole is pole ①，the second is pole ②，the third is pole ③，
and the final one (also the innermost) is pole ④.
Nut (K)
3
4
2
1
Washer (H)
B
B A
Tips: Every node at the bottom circle will have four pole ends.
B
A
3
4
A
1
Third, repeat the
operation at the second
step, and you will get the
following shape. Now, the
bottom circle has been
Short bolt (F)
finished.
2
13