Publicidad
Idiomas disponibles
Idiomas disponibles
Step 4: Third Circle Assembly ( Important: choose 1 tube(B) and 1 tube(L)
for assemble )
First, pick up one pole(B), two strengthed poles(L), one long bolt (E), one normal
washer (H) and one thin nut (G).
Second, choose one of the nodes at the second circle, then fix the poles
together with tools Part I and Part J.
Tips: The order of the poles needs to be the same as the order marked in the
following picture. The outermost pole is pole ⑥，the second is pole ⑤，the
third is pole ④，the fourth is pole ③，the fifth is pole ② and the final one (also
the innermost) is pole ①.
Note: The
bolt should be
threaded from
the inside out.
L
B
A
5
4
3
B
2
6
1
A
Third: Repeat the above operation for the rest nodes. The third circle has been
finished!
Tips: Every node at the third circle will have six pole ends.
16
B
A
A
A
B
A
L
B
A
L
B
A
L
L
L
L
B
L
L
Step 5: Roof Assembly
Pick up one long bolt (E), one normal washer (H) and one thin nut (G), then fix
the poles at the roof together with tools Part I and Part J.
Tips: The order of the poles needs to be the same as the order marked in the
following picture. The outermost pole is pole ⑤，the second is pole ④，the
third is pole ③，the fourth is pole ②， and the final one (also the innermost) is
pole ①.
L
L
Note: The bolt
should be
threaded from the
inside out.
L
4
3
L
2
5
1
L
17
Publicidad
