Ordering Replacement Parts; Disposal And Recycling; Storage And Transport - EINHELL GE-HM 38 S-F Manual De Instrucciones

to more wear and tear than any other
component of the unit. Check the condition
of the blade on the mowing spindle at regular
intervals and make sure that it is tightly
fastened.
•
If the blades on the mower spindle become
blunt and need replacing, please contact our
customer service. Use only genuine spare
parts.
7.2.1 Setting the counter blade (Fig. 8)
Warning! Wear safety gloves.
The counter blade (21) is pre-set at the factory.
Re-adjustment might be required after prolonged
use.
•
If the counter blade is too loose, the cut will
look rough and uneven.
•
If the counter blade is too tight, the mower will
be noisy and hard to push.
The socket head screws (22) on both sides of
the mower must be adjusted evenly such that the
counter blade (21) and the mower spindle (23)
touch without making hardly a sound.
•
Turn the socket head screw (22) clockwise
= The counter blade will move closer to the
mower spindle.
•
Turn the socket head screw (22) counter-
clockwise = The counter blade will move
further away from the mower spindle.
The counter blade (21) is correctly adjusted if a
piece of paper placed between the blades on the
mowing spindle (23) and the counter blade will be
cut along its full length when you turn one of the
wheels forwards by hand without force.

7.3 Ordering replacement parts:

Service
1. If your power tool requires service,
contact an authorized Einhell USA dealer
or call the Einhell USA customer service
center at 1-866-EINHELL
(1-866-346-4355). Only identical
replacement parts should be utilized for
repairs. This will ensure that the safety of the
power tool is maintained.
2. If the battery charger cable is damaged, it
must be immediately replaced to avoid a
hazard. Contact the Einhell USA
service center at 1-866-EINHELL
(1-866-346-4355) for assistance.
Anl_GE_HM_38_S_F_SPK7_USA.indb 10 Anl_GE_HM_38_S_F_SPK7_USA.indb 10
EN

8. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.

9. Storage and transport

Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
Transport
•
Always carry the mower by its handle and
never reach into the cutting mechanism.
•
Fit the shipping protectors, if any.
•
Protect the machine from damage and the
strong vibrations that can occur particularly
when transporting in vehicles.
•
Secure the machine against slipping and
tipping over.
The reprinting or reproduction by any other
means, in whole or in part, of documentation and
papers accompanying the products is strictly
subject to the express consent of iSC GmbH.
Subject to technical changes
customer
®
- 10 -
17.12.2018 17:18:46 17.12.2018 17:18:46