Descargar Imprimir esta página

HIKOKI DH 12DD Instrucciones De Manejo página 9

Ocultar thumbs Ver también para DH 12DD:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 55
NAMES OF PARTS (Fig. 1 – Fig. 18)
Handle
Pushing button
Switch trigger
Change lever
Name plate
Depth gauge
Drill bit
Front cap
Grip
Housing
LED light
Side handle
Motor
Battery
Display panel
Changeover switch
Display lamp
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DH12DD: Cordless Rotary Hammer
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V
Rated voltage
n
No-load speed
0
Bpm
Full-load impact rate
φ
Drilling diameter, max.
max
Weight*
kg
(According to EPTA-Procedure 01/2014)
Concrete
Steel
Auto stop lamp
Indicator lamp
Latch
Pilot lamp
Display panel
(Battery)
Remaining battery
indicator switch
Remaining battery
indicator lamp
Indicator lamp: Lights
Grease
Auto stop lamp: Blinks
Auto stop lamp: Lights
Battery sliding
grooves
Terminal (Product)
Air gun
Terminal (Battery)
Sliding grooves
9
Wood
Rotation only function
Rotation and hammering function
Switching ON
Switching OFF
Low mode
Normal mode
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
* Depending on attached battery. The heaviest weight is
measured with BSL1240M.
Battery
Remaining battery indicator switch
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
NOTE
To prevent the battery power consumption caused by
forgetting to turn off the LED light, the light goes off
automatically in about 3 seconds.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 86.
Standard accessories are subject to change without notice.
English

Publicidad

loading